Pump Engine
Cummins KTA19 Pump Diesel Engine (448–760 hp)
Cummins KTA19 18.9 L 6-cylinder diesel engine, 448–760 hp (334–567 kW), 9 ratings for pump work. Each unit nameplate-verified.
Specifications
- Engine Model
- KTA19-P495 ~ P840
- Displacement
- 18.9 L
- Cylinders & Configuration
- Inline 6, 4-cycle
- Rated Power Range
- 334–567 kW (448–760 hp) @ 1500–2100 rpm
- Aspiration
- Turbocharged Aftercooled
- Applications
- Pump
- Documentation
- Nameplate verification + load-test record per serial number
Overview
The Cummins KTA19 is a 18.9 L 6-cylinder Cummins diesel engine supplied in 9 factory ratings from 448 hp (334 kW) to 760 hp (567 kW). Every rating listed on this page is a complete engine for pump duty, not a generator set, and each unit ships with its serial number recorded against the specification sheet that applies to it.
Ratings in this family differ in rated speed, peak torque and emissions tier rather than in displacement or cylinder count, so the choice between them is a duty-matching question. The specifications panel and the per-rating entries on this page are generated from the same source data, so a rating quoted here can be matched directly against a delivery document.
Specifications
The specifications panel lists the family-level values that are common to every KTA19 rating, including the 18.9 L displacement and the inline 6-cylinder layout. Ratings that share displacement and cylinder count but differ in output are listed individually in the model selection section.
Model Selection: KTA19 Ratings
Each entry in this section is one rating of the Cummins KTA19. The rated power is the output at the stated speed; the peak torque figure is the value the rating develops at the lower speed shown, which is what normally decides whether a rating suits a given machine. Each rating carries a stable anchor, so a single rating can be linked or quoted directly.
KTA19-P495
KTA19-P495 — rated 334 kW (448 hp) at 1500 rpm.
KTA19-P500
KTA19-P500 — rated 338 kW (453 hp) at 1500 rpm.
KTA19-P525
KTA19-P525 — rated 392 kW (525 hp) at 2100 rpm.
KTA19-P600
KTA19-P600 — rated 405 kW (543 hp) at 1500 rpm.
KTA19-P680
KTA19-P680 — rated 459 kW (616 hp) at 1500 rpm.
KTA19-P700
KTA19-P700 — rated 472 kW (633 hp) at 1800 rpm.
KTA19-P750
KTA19-P750 — rated 506 kW (679 hp) at 1800 rpm.
KTA19-P755
KTA19-P755 — rated 510 kW (684 hp) at 1800 rpm.
KTA19-P840
KTA19-P840 — rated 567 kW (760 hp) at 1800 rpm.
Applications
KTA19 engines in this family are normally specified for pump work.
Pump duty: ratings in this family are quoted with the pump curve and the driven speed in view, because a pump absorbs power with the cube of speed, so the governing point rather than the nameplate figure decides the match.
Verification, Documentation and Ordering
Each engine is offered with nameplate verification + load-test record per serial number. That means the model and rating printed on the engine nameplate can be checked against the record issued for that serial number before shipment, which is the point most buyers of re-rated or re-exported engines want covered.
To receive a quotation, send the exact rating from the matrix above (for example KTA19-P840), the machine or application it will drive, the quantity, and the destination port. If the rating you need is not listed, send the model and the required output and we will confirm whether it belongs to this family or to a neighbouring one.
Buyer tip: Send your KTA19 specification, quantity and destination port for a verified quotation and lead time.
Frequently Asked Questions
What is the power range of the KTA19?
The 9 ratings listed on this page run from 448 hp (334 kW) to 760 hp (567 kW), at governed speeds between 1500 and 2100 rpm.
What displacement and cylinder count does the KTA19 use?
Every rating in this family shares the same 18.9 L displacement and inline 6-cylinder, 4-cycle configuration. Ratings differ in output, rated speed and emissions tier rather than in the base engine.
What is the difference between KTA19-P755 and KTA19-P840?
KTA19-P755 is rated 510 kW (684 hp) at 1800 rpm, while KTA19-P840 is rated 567 kW (760 hp) at 1800 rpm. They use the same base engine; the higher rating is the one to specify when the driven load needs the extra torque at the lower speed.
How is a KTA19 rating ordered?
Send the exact rating shown in the model selection table, the application it will drive, the quantity and the destination port. The engine is then quoted against that rating and confirmed against its nameplate and load-test record.
