G-drive Engine
Cummins NTA855 Generator Drive Diesel Engine
Cummins NTA855 14.0 L 6-cylinder diesel engine, 381 hp (284 kW), 7 ratings for generator drive work. Each unit nameplate-verified.
Specifications
- Engine Model
- NTA855
- Displacement
- 14.0 L
- Cylinders & Configuration
- Inline 6, 4-cycle
- Rated Power Range
- 284 kW (381 hp) @ 1500 rpm
- Aspiration
- Turbocharged Aftercooled
- Applications
- Generator Drive
- Documentation
- Nameplate verification + load-test record per serial number
Overview
The Cummins NTA855 is a 14.0 L 6-cylinder Cummins diesel engine supplied in 7 factory ratings from 381 hp (284 kW) to 381 hp (284 kW). Every rating listed on this page is a complete engine for generator drive duty, not a generator set, and each unit ships with its serial number recorded against the specification sheet that applies to it.
Ratings in this family differ in rated speed, peak torque and emissions tier rather than in displacement or cylinder count, so the choice between them is a duty-matching question. The specifications panel and the per-rating entries on this page are generated from the same source data, so a rating quoted here can be matched directly against a delivery document.
Specifications
The specifications panel lists the family-level values that are common to every NTA855 rating, including the 14.0 L displacement and the inline 6-cylinder layout. Ratings that share displacement and cylinder count but differ in output are listed individually in the model selection section.
Model Selection: NTA855 Ratings
Each entry in this section is one rating of the Cummins NTA855. The rated power is the output at the stated speed; the peak torque figure is the value the rating develops at the lower speed shown, which is what normally decides whether a rating suits a given machine. Each rating carries a stable anchor, so a single rating can be linked or quoted directly.
NTA855-G1B
NTA855-G1B — rated 284 kW (381 hp) at 1500 rpm.
NTA855-G1
NTA855-G1 — specification to be confirmed from the source sheet.
NTA855-G4
NTA855-G4 — specification to be confirmed from the source sheet.
NTA855-G2
NTA855-G2 — specification to be confirmed from the source sheet.
NTA855-G3
NTA855-G3 — specification to be confirmed from the source sheet.
NTA855-G1A
NTA855-G1A — specification to be confirmed from the source sheet.
NTA855-G2A
NTA855-G2A — specification to be confirmed from the source sheet.
Applications
NTA855 engines in this family are normally specified for generator drive work.
Generator drive: ratings here are quoted at a fixed governed speed, and the engine is matched to the alternator frame and the prime/standby duty that the site actually needs.
Verification, Documentation and Ordering
Each engine is offered with nameplate verification + load-test record per serial number. That means the model and rating printed on the engine nameplate can be checked against the record issued for that serial number before shipment, which is the point most buyers of re-rated or re-exported engines want covered.
To receive a quotation, send the exact rating from the matrix above (for example NTA855-G2A), the machine or application it will drive, the quantity, and the destination port. If the rating you need is not listed, send the model and the required output and we will confirm whether it belongs to this family or to a neighbouring one.
Buyer tip: Send your NTA855 specification, quantity and destination port for a verified quotation and lead time.
Frequently Asked Questions
What displacement and cylinder count does the NTA855 use?
Every rating in this family shares the same 14.0 L displacement and inline 6-cylinder, 4-cycle configuration. Ratings differ in output, rated speed and emissions tier rather than in the base engine.
How is a NTA855 rating ordered?
Send the exact rating shown in the model selection table, the application it will drive, the quantity and the destination port. The engine is then quoted against that rating and confirmed against its nameplate and load-test record.
